Apply filter

Back to overview

PA-R-250-9 Industrial Actuators PA-R-250-9 Industrial Actuators

PA-R-250-9
Industrial Actuators

One of our industrial customers asked for a high output version of our proven PA-R-250-8 actuator. We implemented a high-output-brushless DC motor and adjusted the gear-train as well as the servo case design. The result was the PA-R-250-9 actuator. Its power-to-weight ratio is second to none.

Configuration and request     Start     

Characteristics

Continuous torque 400 Ncm (566,45 oz-in)
Max. torque > 700 Ncm (> 991,28 oz-in)
Operating voltage 12 or 24 V DC
No load speed 185 °/sec @24VDC
Weight 335 gr. (11,815 oz)
Travel angle ± 90° (standard PA-ME / contactless angle sensor),
alternative angles on request
PC-Board digital - programmable - with differential, analog sensor feedback
Signal A: PWM signal, TTL level (standard configuraton),
B: PWM signal, differential (RS485 transceiver) (optional),
C: RS485 Data protocol (optional),
N: CANopen CiA 402 (optional)
Motor BLDC motor, Neodym magnet
Gear train hardened steel, spur gear type, 6 ball races with PA-SC overload protection output shaft
Case aluminum, water- and dust protected (IP67), with solid horizontal and vertical 4-point fixation

Documents - Datasheets

Specifications Download PDF 1 MB
drawing_PA-R-250-9-X-XX-X-XXX-60, Actuators with DE9 connector Download PDF 184 KB
drawing_PA-R-250-9-X-XX-X-XXX-63, Actuators with Glenair 801 connector Download PDF 195 KB
drawing_PA-R-250-9-X-XX-X-XXX-67, Actuators with cable pigtail Download PDF 195 KB
performance-graph_PA-R-250-9-X-24-X-XXX-6X Download PDF 112 KB

Accessories

PN-14850011

PA-Control 2

PA-Control 2 programming tool to parameterize your industrial Pegasus Actuator.

PN-14850011 More Info
PN-14850006

Adapter MTA100-DE9 for Actuators without connector

Actuators ordered with Pig Tail but without connector will be manufactured with a Tyco MTA100 connector, to connect those units to the PA-Control 2 the MTA100-DE9 adapter is required.

PN-14850006
PN-14850005

Programming cable for R-205, R-250 Actuators with Glenair 801 connector

Programming / Adapter Cable to connect a R-205 or R-250 type Actuators with Glenair Series 801 size 6-7 connector to the PA-Control 2.

PN-14850005
PN-12509051

PA-IF-250-9-01

Installation frame for R-250-9 Actuators.

PN-12509051 Download PDF
PN-12509033

PA-UL-003

Aluminum universal lever with threads. For R-250 or RR-260 type Actuators, 6,5mm square

PN-12509033 Download PDF
PN-12509034

PA-UL-007

Aluminum universal lever blank quarter. For R-250 or RR-260 type Actuators, 6,5mm square.

PN-12509034 Download PDF
PN-12509043

PA-UL-103

Aluminum universal lever with grooves to create holes or threads and to shorten. For R-250 or RR-260 type Actuators, 6,5mm square.

PN-12509043 Download PDF
PN-12508101

Extension cable for R-205, R-250, RR-260 Actuators, RA-OPV Clutches with Glenair 801 size 6-7 connector

1m cable with a mating Glenair Series 801 size 6-7 connector mounted and sealed on side 1 and an open end on side 2.

PN-12508101
PN-72509003

Mating Connector incl. Pins For Actuators with Glenair 801-size 6-7, olive

Glenair 801-007-16NF6-7SA, Aluminum / Cadmium with Olive Drab Chromate, including 7x Glenair 809-002 (AWG22-28) Socket Contacts.

PN-72509003
PN-74957001

Mating Connector incl. Pins For Actuators with Glenair 801-size 6-7, black

Glenair 801-007-16ZNU6-7SA, Aluminum / Zinc-Nickel with Black Chromate, including 7x Glenair 809-002 (AWG22-28) Socket Contacts.

PN-74957001

Why choose PEGASUS Actuators?

What sets PEGASUS Actuators apart is the combination of competitive pricing, reliable on-time delivery and engineering-driven customization. We offer evaluation samples at reasonable conditions and support system integration with experienced technical guidance. Contact us to discuss your specific requirements and explore how our actuator solutions can be tailored to your application.