Configuration and request

Actuator type

R-205 – industrial / rotary / 20,5 mm wide

Torque index

6 – Continuous torque: 180 Ncm (254,90 oz-in)

Output-shaft

R – Rigid shaft - Standard

C – PA-SC overload protection

Nominal operating voltage

06 – 06 VDC

12 – 12 VDC

24 – 24 VDC - Standard

Input signal type

A – PWM / TTL level - Standard

B – differential PWM

C – RS485 data protocol

Travel angle

180 – 180° travel angle - Standard

340 – 340° travel angle

Revision index

30 – Industrial D-type connector - Standard

33 – Glenair series 801 connector

37 – Cable pigtail

Accessories

Programming device

PN-14850011 – PA-Control 2 programming tool to parameterize your industrial Pegasus Actuator.

Programming adapter / cable

PN-14850006 – Actuators ordered with Pig Tail but without connector will be manufactured with a Tyco MTA100 connector, to connect those units to the PA-Control 2 the MTA100-DE9 adapter is required.

PN-14850005 – Programming / Adapter Cable to connect a R-205 or R-250 type Actuators with Glenair Series 801 size 6-7 connector to the PA-Control 2.

Installation Frames

PN-12056051 – Installation frame for R-205-6 Actuators.

Lever

PN-12054025 – Aluminum universal lever with threads. For R-205 type Actuators, 5mm square.

PN-12054026 – Aluminum universal lever blank quarter. For R-205 type Actuators, 5mm square.

PN-12054045 – Aluminum universal lever with grooves to create holes or threads and to shorten. For R-205 type Actuators, 5mm square.

Extension cable

PN-12508101 – 1m cable with a mating Glenair Series 801 size 6-7 connector mounted and sealed on side 1 and an open end on side 2.

Mating Connector

PN-72509003 – Glenair 801-007-16NF6-7SA, Aluminum / Cadmium with Olive Drab Chromate, including 7x Glenair 809-002 (AWG22-28) Socket Contacts.

PN-74957001 – Glenair 801-007-16ZNU6-7SA, Aluminum / Zinc-Nickel with Black Chromate, including 7x Glenair 809-002 (AWG22-28) Socket Contacts.

PA-R-205-6Industrial Actuators

PA-R-205-6
Industrial Actuators