PA-R-440-7-OPV
Actuators

The PA-R-440-7-OPV servo actuator is based on our PA-R-440-7 industrial actuator, with 35Nm maximum torque it is the Powerhouse of our product range. The combination with our PA-RA-4 magnetic OPV clutch assembly turns it into a powerful OPV servo actuator.

Configuration and request

Actuator type

R-440 – industrial / rotary / 44,0 mm wide

Torque index

7 – Continuous torque: 2000 Ncm (2832,24 oz-in)

Output-shaft

C – PA-SC overload protection - Standard

Nominal operating voltage

24 – 24 VDC - Standard

Input signal type

A – PWM / TTL level - Standard

B – differential PWM

C – RS485 data protocol

Travel angle

180 – 180° travel angle - Standard

340 – 340° travel angle

Revision index

70 – Industrial D-type connector - Standard

73 – Glenair series 801 connector

OPV Connector

03 – Glenair series 801 connector

07 – cable pigtail

Accessories

Programming device

PN-14850011 – PA-Control 2 programming tool to parameterize your industrial Pegasus Actuator.

Programming adapter / cable

PN-14850009 – Programming / Adapter Cable to connect a R-340 or R-440 type Actuator with Glenair Series 801 size 10-202 connector to the PA-Control 2.

Installation Frames

Lever

Extension cable

PN-13407101 – 1m cable with a mating Glenair Series 801 size 10-202 connector mounted and sealed on side 1 and an open end on side 2.

Mating Connector

PN-73407002 – Glenair 801-007-16ZNU10-202SA, Aluminum / Zinc-Nickel with Black Chromate, including 8x Glenair 809-002 (AWG22-28) and 2x 809-111 (AWG16-20) Socket Contacts.

GTC
Export-Policy
Imprint

Cockpit
Products
News and Events
Contact

PA-R-440-7-OPVActuators

PA-R-440-7-OPV
Actuators