Configuration and request

Actuator type

R-135 – industrial / rotary / 13,5 mm wide

Torque index

6 – Continuous torque: 45 Ncm (63,73 oz-in)

Output-shaft

C – PA-SC overload protection - Standard

Nominal operating voltage

06 – 06 VDC - Standard

12 – 12 VDC

24 – 24 VDC

Input signal type

A – PWM / TTL level - Standard

B – differential PWM

C – RS485 data protocol

Travel angle

180 – 180° travel angle - Standard

340 – 340° travel angle

Revision index

30 – Cable pigtail - Standard

33 – Glenair series 881 connector

Accessories

Programming device

PN-14850011 – PA-Control 2 programming tool to parameterize your industrial Pegasus Actuator.

Programming adapter / cable

PN-14850006 – Actuators ordered with Pig Tail but without connector will be manufactured with a Tyco MTA100 connector, to connect those units to the PA-Control 2 the MTA100-DE9 adapter is required.

PN-14850012 – Programming / Adapter Cable to connect a R-135 type Actuators with Glenair Series 881 connector to the PA-Control 2.

Installation Frames

Lever

PN-11354025 – Aluminum universal lever with threads. For R-135 type Actuators, 5mm square.

PN-11354026 – Aluminum universal lever blank quarter. For R-135 type Actuators, 5mm square.

PN-11354045 – Aluminum universal lever with grooves to create holes or threads and to shorten. For PA-R-135 type Actuators, 5mm square.

Extension cable

PN-11354101 – 1m cable with a mating Glenair Series 881 connector mounted and sealed on side 1 and an open end on side 2.

Mating Connector

PN-71354019 – Glenair 881-001P-A-B7N-ZR004J5-24, Aluminum/zinc-nickel, non-reflective with RoHS compliant black chromate.

PA-R-135-6Industrial Actuators

PA-R-135-6
Industrial Actuators