PA-R-440-7
Industrial Actuators

With 35Nm maximum torque the PA-R-440-7 servo-actuator is the powerhouse of our product range. It features a very particular hardened steel gear train equipped with 10 ball and roller bearings. The gear train backlash has been minimized to 0,4°! It features a brushless motor and a contact-less deflection angle sensor.

Configuration and request

Actuator type

R-440 – industrial / rotary / 44,0 mm wide

Torque index

7 – Continuous torque: 2000 Ncm (2832,24 oz-in)

Output-shaft

C – PA-SC overload protection - Standard

Nominal operating voltage

24 – 24 VDC - Standard

Input signal type

A – PWM / TTL level - Standard

B – differential PWM

C – RS485 data protocol

Travel angle

180 – 180° travel angle - Standard

340 – 340° travel angle

Revision index

03 – Glenair series 801 connector - Standard

Accessories

Programming device

PN-14850011 – PA-Control 2 programming tool to parameterize your industrial Pegasus Actuator.

Programming adapter / cable

PN-14850009 – Programming / Adapter Cable to connect a R-340 or R-440 type Actuator with Glenair Series 801 size 10-202 connector to the PA-Control 2.

Installation Frames

Lever

PN-14407043 – Steel universal lever with grooves to create holes or threads and to shorten it. For R-440 or RR-720 type Actuators, 10mm square.

Extension cable

PN-13407101 – 1m cable with a mating Glenair Series 801 size 10-202 connector mounted and sealed on side 1 and an open end on side 2.

Mating Connector

PN-73407002 – Glenair 801-007-16ZNU10-202SA, Aluminum / Zinc-Nickel with Black Chromate, including 8x Glenair 809-002 (AWG22-28) and 2x 809-111 (AWG16-20) Socket Contacts.

GTC
Export-Policy
Imprint

Cockpit
Products
News and Events
Contact

PA-R-440-7Industrial Actuators

PA-R-440-7
Industrial Actuators