Configuration and request

Actuator type

R-340 – industrial / rotary / 34,0 mm wide

Torque index

7 – Continuous torque: 850 Ncm (1203,70 oz-in)

Output-shaft

C – PA-SC overload protection - Standard

Nominal operating voltage

12 – 12 VDC

24 – 24 VDC - Standard

Input signal type

A – PWM / TTL level - Standard

B – differential PWM

C – RS485 data protocol

Travel angle

180 – 180° travel angle - Standard

340 – 340° travel angle

Revision index

70 – Industrial D-type connector - Standard

73 – Glenair series 801 connector

Accessories

Programming device

PN-14850011 – PA-Control 2 programming tool to parameterize your industrial Pegasus Actuator.

Programming adapter / cable

PN-14850009 – Programming / Adapter Cable to connect a R-340 or R-440 type Actuator with Glenair Series 801 size 10-202 connector to the PA-Control 2.

Installation Frames

PN-13407051 – Installation frame for R-340-7 Actuators.

Lever

PN-13407045 – Aluminum universal lever with grooves to create holes or threads and to shorten it. For R-340 or RR-340 type Actuators, 8mm square.

PN-13407421 – Aluminum universal lever blank quarter. For R-340 or RR-340 type Actuators, 8mm square.

Extension cable

PN-13407101 – 1m cable with a mating Glenair Series 801 size 10-202 connector mounted and sealed on side 1 and an open end on side 2.

Mating Connector

PN-73407002 – Glenair 801-007-16ZNU10-202SA, Aluminum / Zinc-Nickel with Black Chromate, including 8x Glenair 809-002 (AWG22-28) and 2x 809-111 (AWG16-20) Socket Contacts.

PA-R-340-7Industrial Actuators

PA-R-340-7
Industrial Actuators